"| d | 38,1 -mm - | | | d | 1 1/2 -inch - | | | D | 47,625 -mm - | | | B | 4,763 -mm - | |
| | - | | D1 | 44,1 -mm - | | | d1 | 41,7 -mm - | | | rmin | 0,38 -mm - | | - | min. 0,38 is the smallest chamfer distance и the largest permissible rounding radius on the shaft и in the housing. |
|
| | - | | m | 0,02 -kg - | | | Cr | 2850 -N - | | - | Динамическая грузоподъемность, радиальная |
| | C0r | 2700 -N - | | - | Статическая грузоподъемность, радиальная |
| | nG Ö-l | 8600 -1/min - | | - | Предельная частота вращения
With grease lubrication, the permissible value is taken as 70% of the value given in the table.
Values are valid for a combination of axial и радиальная loads in a ratio Fa/Fr >-= 0,8. |
|
|
" |
|
