Подшипник INA UG6628 INA / FAG

Print

Guideways
for very slight to slight contamination (1x end wiper, double lip + 1x end plate)
Описание:
"
A66 -mm -
 -Tolerance: -0,1
H28 -mm -
 -Tolerance: -0,1
L2000 -mm -
 -max.
L = stиard length- available as single-piece guideways from 400 mm in steps of 400 mm up to L max.
Intermediate lengths available by agreement. Guideways longer than Lmax are supplied as multi-piece guideways comprising stиard lengths.
The hole pattern of multi-piece guideways continues regularly over the joint.
 -
A112 -mm -
 - -
a218 -mm -
 - -
C440 -mm -
 - -
C5 max35 -mm -
 - -
C5 min15 -mm -
 - -
C6 max35 -mm -
 - -
C6 min15 -mm -
 - -
Ca28 -mm -
 - -
h416,5 -mm -
 - -
K1M8 -
 -According to DIN 912-12.9
The values apply to screws with a preservative.
If there is a possibility of settling, the screws should be secured against rotation.
It must be ensured that the adjacent construction has adequate strength.
See VDI Guideline 2230.
 -
"

Подшипник INA / FAG UG6628

INA / FAG UG6628
Наличие: Уточняйте

Поставщик:

(812) 327-79-70

«...назад