Подшипник INA LFL32-SF INA / FAG

Print

Carriage
solid profile, with two raceway shafts- corrosion-resistant design possible
Описание:
"
H130 -mm -
 - -
B80 -mm -
 - -
L90 -mm -
 - -
 -
A47 -mm -
 - -
G3M6 -
 - -
G4M8 -
 - -
H -
 -Total height of carriage и guideway:

H = 35,5 mm
For LFS, -C, -CE, -CEE, -E, -EE, -N, -NZZ

H = 25,5 mm
For LFS..-F, -FE

H = 81,5 mm
For LFS..-M

The guideway LFS..-M can only be combined with carriages with adjustable clearance.
If SF и LFKL carriages are to be used, please contact us first
H220,5 -mm -
 -Tolerance: +0,3
H314 -mm -
 - -
JB59 -mm -
 -Tolerance: +/-0,2
JB154 -mm -
 - -
JB256 -mm -
 - -
JL160 -mm -
 - -
JL270 -mm -
 -Tolerance: +/-0,2
t17 -mm -
 - -
 -
mW400 -g -
 -Вес of carriage
MA15 -Nm -
 -Valid for stиard design.

Tightening torque for track roller bolts, concentric bolts are supplied tightened to MA.
MA12 -Nm -
 -Valid for corrosion-resistant design ""RB"".

Tightening torque for track roller bolts, concentric bolts are supplied tightened to MA.
 - -
 -The basic load ratings are not valid for ""-RB"" designs.
Cy4100 -N -
 -Динамическая грузоподъемность in y direction
C0y2400 -N -
 -Статическая грузоподъемность in y direction
Cz6600 -N -
 -Динамическая грузоподъемность in z direction
C0z4200 -N -
 -Статическая грузоподъемность in z direction
M0x30 -Nm -
 -Static moment rating about X axis
M0y130 -Nm -
 -Static moment rating about Y axis
M0z70 -Nm -
 -Static moment rating about Z axis
 - -
 -Ordering designation:

- Corrosion-resistant design:
Carriage: LFCL..-RB
Guideway: LFS..-RB
Track roller: LFR..-2RSR-RB

- Guideway without holes:
LFS..-OL
 -LFR50/8-6-2Z -
 -Track roller used
For shaft diameter: 6 mm

For ordering of replacement parts, please contact us.
 -LFS32 -
 -The calculation of basic load ratings и moment ratings is based on the use of this guideway
"

Подшипник INA / FAG LFL32-SF

INA / FAG LFL32-SF
Наличие: Уточняйте

Поставщик:

(812) 327-79-70

«...назад