Подшипник INA LFKL20-SF INA / FAG

Print

Carriage
locating bearing track rollers, double row, gap seals on both sides
Описание:
"
H120,5 -mm -
 - -
B56 -mm -
 - -
L69 -mm -
 - -
 -
G4M5 -
 - -
H -
 -Total height of carriage и guideway:

H = 22 mm
For LFS, -C, -CE, -CEE, -E, -EE, -N, -NZZ
H213 -mm -
 -Tolerance: +0,3
H38,7 -mm -
 - -
JB39 -mm -
 -Tolerance: +/-0,2
JB134 -mm -
 - -
JL134 -mm -
 - -
JL249 -mm -
 -Tolerance: +/-0,2
K25 -mm -
 - -
 -
mW200 -g -
 -Вес of carriage
MA2,5 -Nm -
 -Valid for stиard design.

Tightening torque for track roller bolts, concentric bolts are supplied tightened to MA.
MA2,5 -Nm -
 -Valid for corrosion-resistant design ""RB"".

Tightening torque for track roller bolts, concentric bolts are supplied tightened to MA.
 - -
 -The basic load ratings are not valid for ""-RB"" designs.
Cy1350 -N -
 -Динамическая грузоподъемность in y direction
C0y870 -N -
 -Статическая грузоподъемность in y direction
Cz2400 -N -
 -Динамическая грузоподъемность in z direction
C0z1700 -N -
 -Статическая грузоподъемность in z direction
Mx12 -Nm -
 -Dynamic moment rating about X axis
M0x7 -Nm -
 -Static moment rating about X axis
My41 -Nm -
 -Dynamic moment rating about Y axis
M0y28 -Nm -
 -Static moment rating about Y axis
Mz24 -Nm -
 -Dynamic moment rating about Z axis
M0z15 -Nm -
 -Static moment rating about Z axis
 - -
 -Ordering designation:

- Corrosion-resistant design:
Carriage: LFCL..-RB
Guideway: LFS..-RB
Track roller: LFR..-2RSR-RB

- Guideway without holes:
LFS..-OL
 - -
 -Without lubrication nipple, relubrication possible via end holes
 -LFR50/5-4-2Z -
 -Track roller used
For shaft diameter: 4 mm

For ordering of replacement parts, please contact us.
 -LFS20 -
 -The calculation of basic load ratings и moment ratings is based on the use of this guideway
"

Подшипник INA / FAG LFKL20-SF

INA / FAG LFKL20-SF
Наличие: Уточняйте

Поставщик:

(812) 327-79-70

«...назад