Подшипник INA MLF32086-300-ZR

Linear actuators

T-nuts (see (1), (3), (4) in figure)

Описание:

82 -mm -

86 -mm -

300 -mm -

-	L2 = total stroke + L + 12 L tot = total stroke + L + 2 x L4 + 12 Total stroke = effective stroke + 2 x S ATTENTION: The allowance S designates a safety range suitable for the particular application и should be at least 85 mm- total stroke in mm. Max. guideway length L2 = 8000 mm

B₁

59 -mm -

-	Tolerance: +/-0,1

B₂

43 -mm -

B₃

75 -mm -

80 -mm -

D₁

70 -mm -

-	Tolerance: G7

D₂

61 -mm -

H₁

41,5 -mm -

-	Tolerance: +/-0,5

H₂

81,3 -mm -

H₃

25 -mm -

H₅

50 -mm -

H₆

47 -mm -

L₁

50 -mm -

-	Tolerance: +/-0,1

L₃

122,5 -mm -

L₄

80 -mm -

L₅

14 -mm -

M8 -

O₁

M6 -

2,3 -mm -

-	Tolerance: +0,5

m_Law

1,25 -kg -

-	Вес of carriage

m_tot

(Ltot - 160) x 0,006 + 4,1 -kg -

-	Вес: (L tot - 160) x 0,006 + 4,1

F_{y per}

850 -N -

-	Permissible loads on carriage guidance system: The values are single loads и apply when the underside of the actuator is fully supported. These must be reduced for combined loads.

F_{0y per}

1400 -N -

-	Permissible loads on carriage guidance system: The values are single loads и apply when the underside of the actuator is fully supported. These must be reduced for combined loads.

F_{z per}

1000 -N -

-	Permissible loads on carriage guidance system: The values are single loads и apply when the underside of the actuator is fully supported. These must be reduced for combined loads.

F_{0z per}

1000 -N -

-	Permissible loads on carriage guidance system: The values are single loads и apply when the underside of the actuator is fully supported. These must be reduced for combined loads.

M_{x per}

11 -Nm -

-	Permissible moments on carriage guidance system The values are single loads и apply when the underside of the actuator is fully supported. These must be reduced for combined loads.

M_{0x per}

18 -Nm -

-	Permissible moments on carriage guidance system The values are single loads и apply when the underside of the actuator is fully supported. These must be reduced for combined loads.

M_{y per}

140 -Nm -

-	Permissible moments on carriage guidance system The values are single loads и apply when the underside of the actuator is fully supported. These must be reduced for combined loads.

M_{0y per}

140 -Nm -

-	Permissible moments on carriage guidance system The values are single loads и apply when the underside of the actuator is fully supported. These must be reduced for combined loads.

M_{z per}

85 -Nm -

-	Permissible moments on carriage guidance system The values are single loads и apply when the underside of the actuator is fully supported. These must be reduced for combined loads.

M_{0z per}

150 -Nm -

-	Permissible moments on carriage guidance system The values are single loads и apply when the underside of the actuator is fully supported. These must be reduced for combined loads.

l_y

104 -cm^4 -

-	Geometrical moments of inertia

l_z

76 -cm^4 -

-	Geometrical moments of inertia

20 AT 5 -

-	Toothed belt

640 -N -

-	Permissible toothed belt operating force

18 -Nm -

-	Maximum drive torque

0,068 -kg/m -

-	Вес of toothed belt

175 -mm/Umdr -

-	Feed (mm/revolution)

2,2 x 10^-4 -kg x m^2 -

-	Вес moment of inertia of both gears

Наличие: Уточняйте

Поставщик:

(812) 327-79-70

«...назад

Nav view искать

Навигация

Искать

Контакт

Каталоги продукции

Подшипник INA MLF32086-300-ZR

Linear actuators

Поставщик:

(812) 327-79-70