Подшипник INA MLF52130-300-ZR

Linear actuators

plastic dummy guideways for linear recirculating roller bearing и guideway assembly

Описание:

119 -mm -

130 -mm -

300 -mm -

-	L2 = total stroke + L + 12 L tot = total stroke + L + 2 x L4 + 12 Total stroke = effective stroke + 2 x S ATTENTION: The allowance S designates a safety range suitable for the particular application и should be at least 85 mm- total stroke in mm. Max. guideway length L2 = 8000 mm

B₁

90 -mm -

-	Tolerance: +/-0,1

B₂

80 -mm -

B₃

112 -mm -

115 -mm -

D₁

95 -mm -

-	Tolerance: G7

D₂

76 -mm -

H₁

60,5 -mm -

-	Tolerance: +/-0,5

H₂

117,7 -mm -

H₃

25 -mm -

H₄

50 -mm -

H₅

72,8 -mm -

H₆

65,4 -mm -

L₁

55 -mm -

-	Tolerance: +/-0,1

L₃

105 -mm -

L₄

115,5 -mm -

L₅

19 -mm -

M10 -

O₁

M8 -

4 -mm -

-	Tolerance: +0,5

m_Law

2,7 -kg -

-	Вес of carriage

m_tot

(Ltot - 231) x 0,0128 + 10,5 -kg -

-	Note maximum tightening torques

F_{y per}

1500 -N -

-	Permissible loads on carriage guidance system: The values are single loads и apply when the underside of the actuator is fully supported. These must be reduced for combined loads.

F_{0y per}

2500 -N -

-	Permissible loads on carriage guidance system: The values are single loads и apply when the underside of the actuator is fully supported. These must be reduced for combined loads.

F_{z per}

3500 -N -

-	Permissible loads on carriage guidance system: The values are single loads и apply when the underside of the actuator is fully supported. These must be reduced for combined loads.

F_{0z per}

3500 -N -

-	Permissible loads on carriage guidance system: The values are single loads и apply when the underside of the actuator is fully supported. These must be reduced for combined loads.

M_{x per}

33 -Nm -

-	Permissible moments on carriage guidance system The values are single loads и apply when the underside of the actuator is fully supported. These must be reduced for combined loads.

M_{0x per}

52 -Nm -

-	Permissible moments on carriage guidance system The values are single loads и apply when the underside of the actuator is fully supported. These must be reduced for combined loads.

M_{y per}

245 -Nm -

-	Permissible moments on carriage guidance system The values are single loads и apply when the underside of the actuator is fully supported. These must be reduced for combined loads.

M_{0y per}

245 -Nm -

-	Permissible moments on carriage guidance system The values are single loads и apply when the underside of the actuator is fully supported. These must be reduced for combined loads.

M_{z per}

125 -Nm -

-	Permissible moments on carriage guidance system The values are single loads и apply when the underside of the actuator is fully supported. These must be reduced for combined loads.

M_{0z per}

210 -Nm -

-	Permissible moments on carriage guidance system The values are single loads и apply when the underside of the actuator is fully supported. These must be reduced for combined loads.

l_y

386 -cm^4 -

-	Geometrical moments of inertia

l_z

301 -cm^4 -

-	Geometrical moments of inertia

32 AT 10 -

-	Toothed belt

1750 -N -

-	Permissible toothed belt operating force

73,5 -Nm -

-	Maximum drive torque

0,2 -kg/m -

-	Вес of toothed belt

270 -mm/Umdr -

-	Feed (mm/revolution)

12,6 x 10^-4 -kg x m^2 -

-	Вес moment of inertia of both gears

Наличие: Уточняйте

Поставщик:

(812) 327-79-70

«...назад

Nav view искать

Навигация

Искать

Контакт

Каталоги продукции

Подшипник INA MLF52130-300-ZR

Linear actuators

Поставщик:

(812) 327-79-70