Подшипник INA MKUVS42-LM-ADA-KT-STOD INA / FAG

Print

Linear actuators
plastic dummy guideways for linear recirculating roller bearing и guideway assembly
Описание:
"
H125 -mm -
 - -
B115 -mm -
 - -
L460 -mm -
 - -
 -
1) -
 -L2 = total stroke + L1 + 54
Ltot = total stroke + L + 54 + 86
Total stroke = effective stroke + 2 x S
The allowance S designates a safety range suitable for the particular application и should be at least 50 mm- total stroke in mm.
Maximum single-piece support rail length L2 = 8 000 mm
2) -
 -Flexible cable trunking system
3) -
 -Shock absorbers
4) -
 -End stop buffer
5) -
 -Covering strip
6) -
 -M6 x 10 deep (8x)
7) -
 -Lubrication connector on both sides
8) -
 -Lubrication nipple to DIN 3405-AM6 (4x)
9) -
 -Top edge of carriage
B280 -mm -
 - -
B3140 -mm -
 - -
B4133 -mm -
 - -
B551 -mm -
 - -
H110 -mm -
 - -
H330 -mm -
 - -
H470 -mm -
 - -
H5128 -mm -
 - -
L1480 -mm -
 - -
L343 -mm -
 - -
L4323 -mm -
 - -
 -
mtot(Ltot - 86) x 0,02 + 12 -kg -
 -Вес excluding flexible cable trunking system
mLaw8,8 -kg -
 -Вес of carriage
C27,4 -kN -
 -Basic load ratings of carriage guidance system
Values are valid only for calculating Lh
C051 -kN -
 -Basic load ratings of carriage guidance system
Values are valid only for calculating Lh
M0x1450 -Nm -
 -Static moment rating of linear guidance system
The values are single loads и apply when the underside of the actuator is fully supported.
These must be reduced for combined loads
For design criteria for the linear guidance system, see under series: Linear guidance systems / Linear recirculating ball bearing units / KUVS..
M0y3940 -Nm -
 -Static moment rating of linear guidance system
The values are single loads и apply when the underside of the actuator is fully supported.
These must be reduced for combined loads
For design criteria for the linear guidance system, see under series: Linear guidance systems / Linear recirculating ball bearing units / KUVS..
M0z4020 -Nm -
 -Static moment rating of linear guidance system
The values are single loads и apply when the underside of the actuator is fully supported.
These must be reduced for combined loads
For design criteria for the linear guidance system, see under series: Linear guidance systems / Linear recirculating ball bearing units / KUVS..
ly1192 -cm^4 -
 -Geometrical moments of inertia of support rail
lz432 -cm^4 -
 -Geometrical moments of inertia of support rail
"

Подшипник INA / FAG MKUVS42-LM-ADA-KT-STOD

INA / FAG MKUVS42-LM-ADA-KT-STOD
Наличие: Уточняйте

Поставщик:

(812) 327-79-70

«...назад