Подшипник INA MKLF32086-ZR

Linear actuators

Описание:

82 -mm -

86 -mm -

155 -mm -

-	L2 = total stroke + 2 x L + 12 + Lmin L tot = total stroke + 2 x L + 2 x L4 + 12 + Lmin Total stroke = 2 x effective stroke + 2 x S (effective stroke/carriage in mm) ATTENTION: The allowance S designates a safety range и should be at least 85 mm. Maximum support rail length L2 = 8000 mm.

-	Lubrication nipple to DIN 3 405

-	The minimum distance between the carriages Lmin is dependent on the application и should be at least 20 mm.

-	The underside of the support rail is open over this length

B₁

59 -mm -

-	Tolerance: +/-0,1

B₂

43 -mm -

B₃

75 -mm -

B₄

94 -mm -

80 -mm -

D₁

70 -mm -

-	Tolerance: G7

D₂

61 -mm -

H₁

41,5 -mm -

-	Tolerance: +/-0,5

H₂

81,3 -mm -

H₃

25 -mm -

H₅

50 -mm -

H₆

47 -mm -

L₁

50 -mm -

-	Tolerance: +/-0,1

L₄

80 -mm -

L₅

14 -mm -

L₆

102 -mm -

L₇

80 -mm -

M8 -

O₁

M6 -

2,3 -mm -

-	Tolerance: +0,2

m_tot

(Ltot - 160) x 0,0060 + 5,1 -kg -

Вес

m_Law

0,8 -kg -

-	Вес of carriage

m_Law

1,2 -kg -

-	Вес of carriage with counterstay

F_{y per}

850 -N -

-	Permissible loads on carriage guidance system The values are single loads и apply as values for the individual carriages. These must be reduced for combined loads.

F_{0y per}

1400 -N -

-	Permissible loads on carriage guidance system The values are single loads и apply as values for the individual carriages. These must be reduced for combined loads.

F_{z per}

1000 -N -

-	Permissible loads on carriage guidance system The values are single loads и apply as values for the individual carriages. These must be reduced for combined loads.

F_{0z per}

1000 -N -

-	Permissible loads on carriage guidance system The values are single loads и apply as values for the individual carriages. These must be reduced for combined loads.

M_{x per}

11 -Nm -

-	Permissible moments on carriage guidance system The values are single loads и apply as values for the individual carriages. These must be reduced for combined loads.

M_{0x per}

18 -Nm -

-	Permissible moments on carriage guidance system The values are single loads и apply as values for the individual carriages. These must be reduced for combined loads.

M_{y per}

30 -Nm -

-	Permissible moments on carriage guidance system The values are single loads и apply as values for the individual carriages. These must be reduced for combined loads.

M_{0y per}

30 -Nm -

-	Permissible moments on carriage guidance system The values are single loads и apply as values for the individual carriages. These must be reduced for combined loads.

M_{z per}

26 -Nm -

-	Permissible moments on carriage guidance system The values are single loads и apply as values for the individual carriages. These must be reduced for combined loads.

M_{0z per}

43 -Nm -

-	Permissible moments on carriage guidance system The values are single loads и apply as values for the individual carriages. These must be reduced for combined loads.

l_y

102 -cm^4 -

-	Geometrical moments of inertia of support rail (on the open side)

l_z

65 -cm^4 -

-	Geometrical moments of inertia of support rail (on the open side)

20 AT 5 -

-	Toothed belt

640 -N -

-	Permissible toothed belt operating force

18 -Nm -

-	Maximum drive torque

0,068 -kg/m -

-	Вес of toothed belt

175 -mm/Umdr -

-	Feed (mm/revolution)

2,2 x 10^-4 -kg x m^2 -

-	Вес moment of inertia of both gears

Наличие: Уточняйте

Поставщик:

(812) 327-79-70

«...назад

Nav view искать

Навигация

Искать

Контакт

Каталоги продукции

Подшипник INA MKLF32086-ZR

Linear actuators

Поставщик:

(812) 327-79-70