| mtot | (Ltot - 160) x 0,0125 + 6 -kg - | |
| mLaw | 1,5 -kg - | |
| CI | 22 -kN - | | - | Basic load ratings of carriage guidance system
Load direction I: compressive load
Values are valid only for calculating Lh.
The values are single loads и apply when the underside of the actuator is fully supported. They relate to the individual carriages. These must be reduced for combined loads. |
|
| C0 I | 52 -kN - | | - | Basic load ratings of carriage guidance system
Load direction I: compressive load
Values are valid only for calculating Lh.
The values are single loads и apply when the underside of the actuator is fully supported. They relate to the individual carriages. These must be reduced for combined loads. |
|
| CII | 17,5 -kN - | | - | Basic load ratings of carriage guidance system
Load direction II: tensile load
Values are valid only for calculating Lh.
The values are single loads и apply when the underside of the actuator is fully supported. They relate to the individual carriages. These must be reduced for combined loads. |
|
| C0 II | 33,5 -kN - | | - | Basic load ratings of carriage guidance system
Load direction II: tensile load
Values are valid only for calculating Lh.
The values are single loads и apply when the underside of the actuator is fully supported. They relate to the individual carriages. These must be reduced for combined loads. |
|
| CIII | 16,3 -kN - | | - | Basic load ratings of carriage guidance system
Load direction III: lateral load
Values are valid only for calculating Lh.
The values are single loads и apply when the underside of the actuator is fully supported. They relate to the individual carriages. These must be reduced for combined loads. |
|
| C0 III | 36 -kN - | | - | Basic load ratings of carriage guidance system
Load direction III: lateral load
Values are valid only for calculating Lh.
The values are single loads и apply when the underside of the actuator is fully supported. They relate to the individual carriages. These must be reduced for combined loads. |
|
| M0x per | 330 -Nm - | | - | Permissible moments on carriage guidance system
Values are valid only for calculating Lh.
The values are single loads и apply when the underside of the actuator is fully supported. They relate to the individual carriages. These must be reduced for combined loads. |
|
| M0y per | 250 -Nm - | | - | Permissible moments on carriage guidance system
Values are valid only for calculating Lh.
The values are single loads и apply when the underside of the actuator is fully supported. They relate to the individual carriages. These must be reduced for combined loads. |
|
| M0z per | 240 -Nm - | | - | Permissible moments on carriage guidance system
Values are valid only for calculating Lh.
The values are single loads и apply when the underside of the actuator is fully supported. They relate to the individual carriages. These must be reduced for combined loads. |
|
| - | 32 AT 5 - | |
| - | 650 -N - | | - | Permissible toothed belt operating force |
|
| - | 18 -Nm - | |
| - | 0,068 -kg/m - | |
| - | 175 -mm/Umdr - | |
| - | 2,2 x 10^-4 -kg x m^2 - | | - | Вес moment of inertia of both gears |
|
