Подшипник INA MDKUVE15-3ZR INA / FAG

Print

Tиem linear actuators
carriage with four rows of balls
Описание:
"
H105 -mm -
 - -
B176 -mm -
 - -
L240 -mm -
 - -
 -
22) -
 -Slot width 8
23) -
 -Slot width 5
B280 -mm -
 -Slot width 8 mm
B3130 -mm -
 -Slot width 8 mm
B570 -mm -
 -In linear actuator MDKU(V)E15-3ZR:
Slot width 8 mm

In linear actuator MDKU(S)E25-3ZR:
Slot width 10 mm
B6140 -mm -
 -In linear actuator MDKU(V)E15-3ZR:
Slot width 8 mm

In linear actuator MDKU(S)E25-3ZR:
Slot width 10 mm
B7180 -mm -
 - -
B88 -mm -
 - -
D80 -mm -
 - -
D170 -mm -
 -Tolerance: G7
D261 -mm -
 - -
H145,5 -mm -
 -Tolerance: +/-0,5
H285,5 -mm -
 - -
H325 -mm -
 -Slot width 8 mm
H445 -mm -
 -In linear actuator MDKU(V)E15-3ZR:
Slot width 5 mm

In linear actuator MDKU(S)E25-3ZR:
Slot width 8 mm
H574,5 -mm -
 - -
L1282 -mm -
 - -
L480 -mm -
 - -
OM6 -
 - -
T2,3 -mm -
 -Tolerance: +0,2
 -
mLaw5,5 -kg -
 -Вес of carriage
mtot(Ltot - 160) x 0,0156 + 12,7 -kg -
 -Вес:
(L tot-160) x 0,0156 + 12,7
ly1636 -cm^4 -
 -Geometrical moments of inertia
lz200 -cm^4 -
 -Geometrical moments of inertia
CI19000 -N -
 -Basic load ratings:

ATTENTION: Values are valid only for calculating Lh.
C0 I58000 -N -
 -Basic load ratings:

ATTENTION: Values are valid only for calculating Lh.
CII19000 -N -
 -Basic load ratings:

ATTENTION: Values are valid only for calculating Lh.
C0 II58000 -N -
 -Basic load ratings:

ATTENTION: Values are valid only for calculating Lh.
CIII19000 -N -
 -Basic load ratings:

ATTENTION: Values are valid only for calculating Lh.
C0 III58000 -N -
 -Basic load ratings:

ATTENTION: Values are valid only for calculating Lh.
M0x2400 -Nm -
 -Permissible static moment on linear guidance system:
The values are single loads и apply when the underside of the actuator is fully supported.
These must be reduced for combined loads.
For design criteria of the linear guidance system, see Catalogue PF1.
M0y1700 -Nm -
 -Permissible static moment on linear guidance system:
The values are single loads и apply when the underside of the actuator is fully supported.
These must be reduced for combined loads.
For design criteria of the linear guidance system, see Catalogue PF1.
M0z1500 -Nm -
 -Permissible static moment on linear guidance system:
The values are single loads и apply when the underside of the actuator is fully supported.
These must be reduced for combined loads.
For design criteria of the linear guidance system, see Catalogue PF1.
 -40AT10 -
 -Toothed belt
 -4500 -N -
 -Permissible toothed belt operating force
 -115 -Nm -
 -Maximum drive torque
 -0,75 -kg/m -
 -Вес of toothed belt
 -160 -mm/Umdr -
 -Feed (mm/revolution)
 -8,2 x 10^-4 -kg x m^2 -
 -Вес moment of inertia of both gears
 - -
 -L2 = total stroke + L1 + 12
L tot = total stroke + L1 + 12 + 2 x L4
Total stroke = effective stroke + 2 x S.

ATTENTION: The allowance S designates a safety range suitable for the particular application и should be at least 85 mm-
total stroke in mm.

Maximum single-piece support rail length L2 = 6000 mm.
"

Подшипник INA / FAG MDKUVE15-3ZR

INA / FAG MDKUVE15-3ZR
Наличие: Уточняйте

Поставщик:

(812) 327-79-70

«...назад