Подшипник INA MDKUSE25-3ZR INA / FAG

Print

Tиem linear actuators
with integral planetary gearbox- carriage with six rows of balls
Описание:
"
H145 -mm -
 - -
B250 -mm -
 - -
L365 -mm -
 - -
 -
21) -
 -Slot width 10
22) -
 -Slot width 8
B135 -mm -
 -Slot width 8 mm
B2115 -mm -
 -Slot width 8 mm
B3185 -mm -
 -Slot width 8 mm
B450 -mm -
 -In linear actuator MDKU(V)E15-3ZR:
Slot width 8 mm

In linear actuator MDKU(S)E25-3ZR:
Slot width 10 mm
B5110 -mm -
 -In linear actuator MDKU(V)E15-3ZR:
Slot width 8 mm

In linear actuator MDKU(S)E25-3ZR:
Slot width 10 mm
B6210 -mm -
 -In linear actuator MDKU(V)E15-3ZR:
Slot width 8 mm

In linear actuator MDKU(S)E25-3ZR:
Slot width 10 mm
B7260 -mm -
 - -
B810 -mm -
 - -
B9263 -mm -
 - -
D115 -mm -
 - -
D195 -mm -
 -Tolerance: G7
D276 -mm -
 - -
H163 -mm -
 -Tolerance: +/-0,5
H2120,5 -mm -
 - -
H325 -mm -
 -Slot width 8 mm
H450 -mm -
 -In linear actuator MDKU(V)E15-3ZR:
Slot width 5 mm

In linear actuator MDKU(S)E25-3ZR:
Slot width 8 mm
H5108 -mm -
 - -
L1405 -mm -
 - -
L4115,5 -mm -
 - -
OM8 -
 - -
T4 -mm -
 -Tolerance: +0,5
 -
mLaw14,1 -kg -
 -Вес of carriage
mtot(Ltot - 231) x 0,0325 + 30 -kg -
 -Вес
ly7069 -cm^4 -
 -Geometrical moments of inertia
lz899 -cm^4 -
 -Geometrical moments of inertia
CI73900 -N -
 -Basic load ratings:

ATTENTION: Values are valid only for calculating Lh.
C0 I268000 -N -
 -Basic load ratings:

ATTENTION: Values are valid only for calculating Lh.
M0x9500 -Nm -
 -Permissible static moment on linear guidance system:
The values are single loads и apply when the underside of the actuator is fully supported.
These must be reduced for combined loads.
For design criteria of the linear guidance system, see Catalogue PF1.
M0y11000 -Nm -
 -Permissible static moment on linear guidance system:
The values are single loads и apply when the underside of the actuator is fully supported.
These must be reduced for combined loads.
For design criteria of the linear guidance system, see Catalogue PF1.
M0z10000 -Nm -
 -Permissible static moment on linear guidance system:
The values are single loads и apply when the underside of the actuator is fully supported.
These must be reduced for combined loads.
For design criteria of the linear guidance system, see Catalogue PF1.
CII60400 -N -
 -Basic load ratings:

ATTENTION: Values are valid only for calculating Lh.
C0 II172000 -N -
 -Basic load ratings:

ATTENTION: Values are valid only for calculating Lh.
CIII56200 -N -
 -Basic load ratings:

ATTENTION: Values are valid only for calculating Lh.
C0 III184000 -N -
 -Basic load ratings:

ATTENTION: Values are valid only for calculating Lh.
 -50AT10 -
 -Toothed belt
 -5640 -N -
 -Permissible toothed belt operating force
 -207 -Nm -
 -Maximum drive torque
 -0,95 -kg/m -
 -Вес of toothed belt
 -230 -mm/Umdr -
 -Feed (mm/revolution)
 -35,2 x 10^-4 -kg x m^2 -
 -Вес moment of inertia of both gears
 - -
 -L2 = total stroke + L1 + 12
L tot = total stroke + L1 + 12 + 2 x L4
Total stroke = effective stroke + 2 x S.

ATTENTION: The allowance S designates a safety range suitable for the particular application и should be at least 85 mm-
total stroke in mm.

Maximum single-piece support rail length L2 = 6000 mm.
"

Подшипник INA / FAG MDKUSE25-3ZR

INA / FAG MDKUSE25-3ZR
Наличие: Уточняйте

Поставщик:

(812) 327-79-70

«...назад