Подшипник INA V8050 INA / FAG

Print

Guideways
cylindrical outer ring, with steel aligning ring, P seals on both sides
Описание:
"
h326 -mm -
 - -
A350 -mm -
 -Tolerance: -0,2
Lmax1300 -mm -
 -Guideways longer than the stated maximum length are available in several sections. For multi-piece guideways, state total length when ordering.
 -
37) -
 -Holes for wipers, end piece
38) -
 -Hole type 15
39) -
 -Hole type 10
4) -
 -Marking
40) -
 -Hole type 03
a137 -mm -
 - -
amin1,3 x 45°- -
 - -
C4100 -mm -
 -MV3015- for L=100 mm to 109 mm, C4=35 mm
(3 holes).
Other sizes: for L <- C4 + C5 min + C6 min,
C4 = 50 mm.
C5 min20 -mm -
 -C5 и C6 are dependent on the guideway length и are identical at both ends of the guideway.
C5 и C6 = (L - total C4) / 2 -
values must not be less than C5 min и C6 min.
C6 min20 -mm -
 -C5 и C6 are dependent on the guideway length и are identical at both ends of the guideway.
C5 и C6 = (L - total C4) / 2 -
values must not be less than C5 min и C6 min.
h114 -mm -
 - -
K1M12 -
 -For screws to DIN 912- 8.8
K3M6 -
 - -
tmin30 -mm -
 - -
 -
"

Подшипник INA / FAG V8050

INA / FAG V8050
Наличие: Уточняйте

Поставщик:

(812) 327-79-70

«...назад