Подшипник INA M7040 INA / FAG

Print

Guideways
M guideways with adjusting gib и angled cylindrical roller flat cage- corrosion-resistant design possible
Описание:
"
h240 -mm -
 - -
A340 -mm -
 -Tolerance: -0,2
Lmax1300 -mm -
 -Guideways longer than the stated maximum length are available in several sections. For multi-piece guideways, state total length when ordering.
 -
37) -
 -Holes for wipers, end piece
38) -
 -Hole type 15
39) -
 -Hole type 10
4) -
 -Marking
40) -
 -Hole type 03
a129 -mm -
 - -
amin1,3 x 45°- -
 - -
C4100 -mm -
 -MV3015- for L=100 mm to 109 mm, C4=35 mm
(3 holes).
Other sizes: for L <- C4 + C5 min + C6 min,
C4 = 50 mm.
C5 min20 -mm -
 -C5 и C6 are dependent on the guideway length и are identical at both ends of the guideway.
C5 и C6 = (L - total C4) / 2 -
values must not be less than C5 min и C6 min.
C6 min20 -mm -
 -C5 и C6 are dependent on the guideway length и are identical at both ends of the guideway.
C5 и C6 = (L - total C4) / 2 -
values must not be less than C5 min и C6 min.
h113 -mm -
 - -
K1M10 -
 -For screws to DIN 912- 8.8
K3M6 -
 - -
tmin25 -mm -
 - -
 -
"

Подшипник INA / FAG M7040

INA / FAG M7040
Наличие: Уточняйте

Поставщик:

(812) 327-79-70

«...назад