- | 0 / -11 -µ-m - | |
 - | +5 / -3 -µ-m - |  - | Special tolerance j5: Only for shafts made from quenched и tempered steel. |
|
 - | -16 / -34 -µ-m - |  - | Special tolerance f7: Only for shafts made from quenched и tempered steel. |
|
4) |  - |  - | For shaft length <- 400 mm max. straightness tolerance of 0,04 mm. |
|
Rhtmin | 0,6 -mm - |  - | Surface hardening depth: To DIN ISO 13012 |
|
t1 | 5 -µ-m - | |
t2 | 8 -µ-m - |  - | Parallelism: Measured diameter deviation. |
|