"| h | 38,7 -mm - | | | b | 23 -mm - | | - | Tolerance: -0,005 / -0,03 |
| | lmax | 1500 -mm - | | - | Maximum length of single-piece guideways- longer guideways are supplied in several sections и are marked accordingly.
Toothed guideways of size 25 are manufactured in the following lengths l max:
1,500 mm
960 mm
540 mm
The ends of guideways of these lengths are cut obliquely и can be used directly for joining of guideways. |
|
| | - | | 1) | - | | | 2) | - | | | aL max | 53 -mm - | | - | a L и a R are dependent on the length l max of the guideway |
| | aL min | 20 -mm - | | - | a L и a R are dependent on the length l max of the guideway |
| | aR max | 53 -mm - | | - | a L и a R are dependent on the length l max of the guideway |
| | aR min | 20 -mm - | | - | a L и a R are dependent on the length l max of the guideway |
| | h1 | 13 -mm - | | | h2 max | 3 -mm - | | | h4 | 11,5 -mm - | | | jL | 60 -mm - | | | K1 | M6 - | | - | Fixing screws to ISO 4762-12.9
Max. tightening torque in Nm:
M6 = 17
M8 = 41
If there is a possibility of settling, the fixing screws should be secured against rotation. |
|
| | - | | mS | 6,3 -kg/m - | | | m | 2 - | | - | Modulus- also available with other modulus values |
| | - | - | | - | Teeth, centre distance и ratio to DIN3 975/76 |
|
|
" |
|
